Ontario Thermal Processing Division

Heat Treating, Brazing & Engineering Services

1371 Speers Rd., Oakville, Ontario - Canada L6L 2X5

Map and Driving Directions: 

From Pearson (Toronto) International Airport:

Exit Airport by following signs for Hwy 427 South to Hwy 401 west. Follow Hwy 401W to Hwy 403 (QEW). Follow Hwy 403 to the Queen Elizabeth Way (QEW) Hamilton. Exit QEW at Third Line Road south in Oakville.

To get to Plants 1, 2 & 3 (Thermal Processing, Head Office and Furnace Manufacturing), follow Third Line Road south to Speers Road. Turn left (east) on Speers Road. Plants 1 & 2 are about 1/2 km east of Third Line Road on the left (north) side of Speers Road. Plant 3 is also on the north side of Speers Road just east of Plants 1 & 2.

From Hamilton/Niagara/Buffalo:

Follow signs to QEW Toronto and exit at Third Line Road. Refer to additional directions above.

Ontario Furnace Manufacturing Division

Furnace Equipment Manufacturing, Maintenance & Rebuild Services

1339 Speers Rd., Oakville, Ontario - Canada L6L 2X5

Map and Driving Directions:

See map and directions above.

Quebec Thermal Processing Division

Heat Treating & Brazing Services

7450 Rue Vérité, St. Laurent, Quebec - Canada H4S 1C5

Map & Driving Directions:

Exit Dorval Airport toward Montreal. When leaving the airport property, drive very slowly so as not to miss the exit for Highway 520 (Côte de Liesse). Follow Highway 520 to the exit for Montée de Liesse. Follow the exit back under Highway 520 towards Montée de Liesse. Follow Montée de Liesse to Chemin St-Francois. Refer to the map for final directions to VAC AERO.

Quebec Coatings Division

Thermal Spray, Inorganic & Pack Coatings

1365 Newton St., Boucherville, Quebec - Canada J4B 5H2

Tel: 450-449-4612 / Fax: 450-641-6590
e-mail: Contact Us - Sales

Map & Driving Directions:

Coming from the Island of Montreal you can either take the Champlain bridge or the Lafontaine tunnel. Once you are on the south shore follow the directions to route 20 towards Quebec city and the take the Nobel street exit to Newton street.